Silicone Oil

Silicone Oil is a water clear silicone fluid available in viscosities ranging from 0.65 centistokes to 1,00,000 centistokes. Important features of fluid include: –

Little change in physical properties over a wide temperature span…a relative flat viscosity-temperature slope and serviceability from — 40 to over 400°F (-40 to 204°C).
Excellent water repellency.
Good dielectric properties over a wide range of temperature and frequencies.
Low surface tension – readily wets clean surfaces to impart water repellency and release characteristics.
Low –toxicity – tests have established that SILICONE OIL is essentially Nontoxic and non-irritating (although temporary discomfort may result if rubbed into the eye).

Silicone Emulsion

Description:
Silicone Emulsion, Mould Release Agent for Rubber and Plastic Industries. In Rubber Industries like tyre, Tubes, Fan belts, Hoses, Gaskets and many other Rubber parts, M.R. Emulsion acts as an efficient and economical release and shining Agent. Silicone emulsion manufacturers, suppliers and exporters in Mumbai, India from 1995 with assured safety and security.

Properties:
M.R. EMULSION does not gum or form carbonaceous deposits that build up on process equipment to cause expensive product rejection.

The release is complete, clean and surface finishes are blemish-free and sharp in details. It improves safety and working conditions and acts an antis tick material and eliminates the need. It is even non-volute and oxidation resistant.

Applications:
Before applying M.R. Emulsion the mould should be completely wetted which assures a continuous, stable Parting film and helps minimize cost per mouldings. Thus it eliminates sticking in extruders, moulds, calendars, and other equipment’s throughout the rubber processing Operation.

The technique for applying M.R. EMULSION varies because of deference in production equipment. M.R. EMULSION may spray automatically or applied manually by swabbing, wiping, dipping or hand spraying.

Silicone Defoamer

MRSI – Silicone Defoamer is a silicone base proprietary product used extensively in a wide variety of industrial batch processing applications. These include petroleum refining, textile processing leather finishing, fermentation processes, oil and antifreeze operation, etc. MRSI – Silicone Defoamer is used where foaming creates an intense problem, especially where aqueous systems are followed. Addition of MRSI-SD prevents the formation of foam and if foam formed then it eliminates within seconds.

Silicone Defoamer Application:In jet dyeing machine or similar processes, MRSI-SD is recommended in the concentration range of 2 to 50 gms/M.T.

Simethicone

Simethicone is a silicone base proprietary product used extensively in a wide variety of industrial batch processing applications. These include petroleum refining, textile processing leather finishing, fermentation processes, oil and antifreeze operation, etc. MRSI-SD is used where foaming creates an intense problem, especially where aqueous systems are followed. Addition of MRSI-SD prevents the formation of foam and if foam formed then it eliminates within seconds.

Application:In jet dyeing machine or similar processes, MRSI-SD is recommended in the concentration range of 2 to 50 gms/M.T.

Silicone Grease

Application of Silicone GreaseSilicone-based grease is suitable for up to the working temperature of 400 °C. This grease contains special types of filler and thickness. This is used for any types of bearings, rubber parts, and electrical parts, plastic parts etc. This is used in Textile, cement plant, fertilizers, steel plants, and chemical plants. Silicone grease manufacturers, exporters as well as suppliers in India and all over the world since 1995 from Mumbai.Benefits of Silicone Grease

Low Coefficient of friction.
High-Temperature stability.
Long-life lubricant.
Reduces the frequency of lubrication.
Resist water-steam Acid & Alkal

Silicone Thread Lubricant

In the present scenery, the speed is the main criteria to activate the targeted production with quality. Successful execution in every step needs proper utilization of man, machine and raw material. The sewing thread Lubricants is one of the most important. Raw materials used by the Sewing Thread manufacturer. Thread Lubricant manufacturers, suppliers and exporters in Mumbai, India to the entire world.

In Textile Industries, a smooth production process is essential for perfect results. During stitching, smooth production needs sewing thread lubricant that imparts the following properties to the sewing thread.

Application:Sewing Thread Lubricant can be either applied to the running yarn by kiss roller Method. Sewing Thread Lubricant is a white milky.

High Vacuum Grease

High Vacuum Grease compound is stiff non-melting grease like Silicone material. It maintains its consistency over a wide temperature range of –400C to 2500C. Its low volatility, the very low vapour pressure of the base, chemical resistance, relatively constant consistency over wide temperature range sealing ability, make it an ideal sealant for high vacuum and high-pressure systems and sealant-cum-lubricant for chemical processing equipment. High Vacuum Grease manufacturers, suppliers and exporters in Mumbai, India to all countries from 1995 with assured safety and security.

Application:
As a sealant and lubricant for glass-ints and stopcocks in high vacuum and high-temperature systems as well as in ordinary systems.
In pressure-lubricated plug valves, control valves and ceramic plug cocks.
In Valves of the water softener.
In fire extinguishers to keep the valves dependably operable for a long period despite severe temperature conditions and corrosive atmosphere.
As a sealant on floating telephone batteries.
Its high tack may be taken advantage of, in holding rubber and other parts in position during assembly of certain parts.
As a release agent for epoxy, polystyrene, polyvinyl chloride, polyester resins and other plastics. Normally it is used only when common release agents including other silicone release agent fail.